TRADE NOTES / OCTOBER 2026

How many track lights do you need?

Count the lighting jobs before counting the heads. A room-area shortcut can miss a tall display, duplicate light over an empty aisle and leave the most important working surface in shadow.

Review the buying questions

2026-10-23 / Trade lighting desk

01 / HOLDER / FORM
Identify the source arrangement
02 / RAIL / ADAPTER
Check the exact system
03 / TARGET / CONTROL
Describe the intended task
01 / TRADE NOTE

The floor area won't tell you

"Sixty square metres — how many track lights?" It's the question every supplier gets and nobody can honestly answer from the area alone. Sixty metres of tall shelving needs one kind of schedule. Sixty metres with two low feature tables and a lot of empty floor needs another. A gallery-ish room with four pictures that matter needs fewer heads than either, placed with far more care. The floor is the same size in all three. The count isn't.

Count targets, not metres. A head earns its place by pointing at something specific — a shelf run, a table, a garment rail, a picture — and if you can't say what a proposed head is for, it isn't a head yet. It's a guess with a price attached.

02 / TRADE NOTE

What is already there?

Before adding anything, look at what the room already receives. A window wall can carry the daytime display almost by itself; fittings left from a previous layout might be doing quiet, useful work that a new plan can build on instead of duplicating. Stand in the room at the hours it actually operates. Morning and evening are different rooms wearing the same address.

This step feels like it slows the estimate down. It speeds the order up, because every head in the final count has to justify itself against a room that was actually observed — not against a blank rectangle on a screen where every surface looks equally needy.

03 / TRADE NOTE

Give every head a destination and a viewer

Work down a list. For each position you're considering, write two things: the surface it serves, and where the person looking at that surface will be. The second half sounds fussy until you try it. A head serving a low table from directly above behaves very differently from one serving it at an angle from the aisle side, and a target viewed close-up tolerates a tighter pool of light than one read from across the room.

Positions that can't complete the sentence — "this head lights ___ for someone standing ___" — come off the list. You can always add a head later. Removing one from a signed order is a negotiation.

04 / TRADE NOTE

Brighter is not the same as better placed

When a display looks under-lit, the instinct is to specify a stronger head. Sometimes that's right. Often the problem is direction: the light is arriving from behind the viewer's shoulder when it should rake across the product face, or a shelf is shadowing exactly the row everyone complains about, and no amount of extra output from the same position fixes a shadow cast by geometry.

Before trading two heads for one brighter one, check whether the existing directions are doing their jobs. One strong source gives you one direction. Two modest sources can model a product, fill a shadow and keep a route comfortable. The totals may look similar on a spreadsheet while the rooms they produce are nothing alike.

05 / TRADE NOTE

Mind the joins

Individually, every patch can look fine. Step back, and the wall tells the truth: stripes. Bright pool, dim seam, bright pool — the eye reads the rhythm before it reads the products. Overlap is where counts quietly grow, because the honest fix for a striped wall is sometimes one more head and sometimes just respacing the ones you have, and you can't tell which until the whole run is up and lit together.

Judge the run as a run. If a seam falls on a gap between product groups, it may not matter at all. If it slices through the hero display, it matters more than the total count does.

While you're standing back there, check the ceiling's own story too. A run of heads aimed at one long wall leaves the rest of the room to fend for itself, and some rooms — a showroom with a consultation table in the middle, say — have a second, quieter set of targets that nobody listed because they weren't shelving. The table needs light that isn't a display beam, and it needs it without a spotlight's drama. Add the room's in-between targets to the schedule as their own lines, in their own plainer language, or the count will be right for the displays and wrong for the room.

06 / TRADE NOTE

Dark finishes drink light; that isn't an order to double up

A charcoal wall, a run of black shelving, deep green paint — darker surfaces return less light to the eye, so the same arrangement looks moodier, quieter, sometimes just dimmer than it did against the pale sample board in the showroom. The reflex is to add heads until the dark room matches the pale room's brightness. Resist it a little. The dark finish was usually chosen for the mood. What the tasks need — readable labels, visible product detail, safe movement — can often be met without dragging the whole room up to showroom glare.

Check the actual materials in the actual room before inflating the count. A photograph of a similar room is a hint, nothing more.

07 / TRADE NOTE

The pattern on the ceiling is not the plan

Regular spacing looks professional on a drawing. It can also put a head exactly where it fires into the eyes of everyone seated on the banquette, or leave the one display that changes monthly stranded between two fixed positions. Comfort and use get to break the pattern. A slightly irregular ceiling that serves every target beats a beautiful grid that misses two of them, and in most rooms nobody looks at the ceiling long enough to grade its symmetry — they're too busy looking at the things the light was bought for.

Switching groups bend the pattern too. If the evening arrangement keeps the window display lit while the back wall rests, those groups need their own logic in the schedule, and the count follows the groups — not the other way round.

08 / TRADE NOTE

Stress-test the number before it hardens

Take the draft count and attack it with the room's near future. The feature table moves two metres left. The shelving gains a deeper unit. The seasonal display doubles in height. Which heads still serve a living target, and which are now lighting the memory of a layout? A count that survives a couple of these moves is a plan. A count that collapses is a photograph of today with a purchase order attached.

Then write the final number the way it was built: a schedule, line by line, each head tied to its target, its viewing position and its group. Send that to the supplier instead of the bare total. The reply you get — model suggestions, questions, warnings about the awkward line — will be about your room. That's worth more than a fast price on a number nobody can trace.

09 / TRADE NOTE

Leave a honest margin, not a hidden one

Every experienced buyer pads the count a little. A head for the display nobody has planned yet, a spare position for the promotion that arrives in a panic. There's nothing wrong with the instinct — rooms grow, ranges change, and a rail with no room to evolve gets expensive quickly. The mistake is hiding the padding inside the justified lines, inflating three targets' worth of reasoning to cover a fourth, unspoken one. Then nobody, including you in six months, can tell which heads were load-bearing and which were insurance.

Write the margin as its own line. "Two further heads, unassigned, against display changes in the first year." It reads like honesty because it is, and it prices like honesty too — a supplier can quote an unassigned head without inventing a target for it. And when the year passes and the margin was never needed, the schedule shows a saving instead of a muddle. If it was needed — it usually is — the record shows a plan working, not a guess getting lucky.

Counts built this way survive meetings. The finance question ("why fourteen?") meets a schedule, a stress test and a declared margin, and the conversation moves on to price and timing, which is where it belonged all along.

Spring swaps the two displays

The spring range arrives and the two feature displays trade places — the tall unit goes where the low table stood, the low table inherits the tall unit's wall. The head schedule, built faithfully from targets, now serves a room that no longer exists: three heads light the memory of tall shelving above a table that needs two at most.

This is the count earning its keep. Because each head was tied to a target and a viewer, the re-plan is an edit, not a restart: these two re-aim, this one slides, the wall group stays as it is. Had the order been a bare number — fourteen heads, spacing even — the swap would have produced fourteen small mysteries instead of one short list.

What should I send Sampo about how many track lights do you need?

Attach the task register and proposed head positions to your Sampo enquiry, with rail details, and request model information before fixing the final quantity.

Ask Sampo about fit

NEXT / HEAD SELECTION

Request a track light quotation

Send the holder family, rail details, quantity and market.

Ask Sampo about fit