TRADE NOTES / OCTOBER 2026

GU10 vs MR16 vs COB track lights

Put three similar-looking heads on a buying desk and the differences can disappear under the paint. GU10, MR16 and COB decisions become clearer when the buyer follows the lamp, supply and maintenance questions through the whole assembly.

Review the buying questions

2026-10-28 / Trade lighting desk

01 / HOLDER / FORM
Identify the source arrangement
02 / RAIL / ADAPTER
Check the exact system
03 / TARGET / CONTROL
Describe the intended task
01 / TRADE NOTE

Three names that answer different questions

Put a GU10 head, an MR16 head and a COB head on a desk. From a metre away they're cousins — cylinders on adapters, same paint, same job, apparently. Buyers then ask which one is "best", and the comparison stalls, because the three names aren't really three answers to one question. They're labels for different arrangements of the same parts: where the light is made, what can be replaced, and what comes in the box.

Start by separating two decisions that love to hide inside each other. First: what are you buying — a finished head ready to install, or a housing that your own side turns into a finished head? Second: which source arrangement do you want to live with afterwards? Mix those up and you'll compare a complete COB head against a bare GU10 housing, find the housing cheaper, and learn the difference at installation time. It happens constantly.

02 / TRADE NOTE

GU10: the lamp stays part of the conversation

With a GU10 arrangement, the lamp is a distinct, replaceable item that sits in the head. That's the appeal and the obligation in one. Appeal, because a failed lamp is a lamp swap — the head stays on the rail, the ladder visit is short, and the person doing it doesn't need the original order file. Obligation, because the chosen lamp is now part of your lighting result. Two lamps that both fit the holder can behave differently on the target and with your control, so "GU10" on the order line settles the holder and leaves the actual light partly undecided.

Keep the lamp visible in the paperwork. Record which lamp was chosen with which head, and what it was chosen for. If that sounds like bureaucracy, wait until a replacement order is placed by someone who joined the company two years later, working from a photo and a guess.

03 / TRADE NOTE

MR16: follow the supply, not just the lamp

MR16 heads raise a similar replaceable-lamp conversation, with an extra thread to pull: the electrical arrangement behind the lamp. Don't let a familiar lamp name close the discussion early. What equipment does this particular head work with, what does the existing installation already provide, and where does one person's responsibility end and the installer's begin? Those questions belong in the enquiry, in writing, next to the head reference.

Buyers get caught when the lamp is treated as the whole story — a neat, small, well-known item — and the supply side arrives as a surprise in a separate box, or doesn't arrive at all because each side of the transaction assumed the other was providing it. Name everything. If a component is needed for the head to work in your installation, it should appear somewhere in the order with a name and a quantity, not live in an assumption.

04 / TRADE NOTE

COB: you are comparing a whole head

A COB arrangement builds the source into the head itself, so the comparison shifts. There's no separate lamp choice to make later; instead, the model is the decision — its beam, its output character, how it behaves with a control, and what servicing means when something eventually fails. You can't swap your way to a different result with a different lamp, so the questions move upstream, to selection day.

That makes the model's own information the thing to ask for: the optical details for your target, the control requirements, the variant options the maker actually offers (adjustable focus and dimmable versions exist in this family, and they are model questions, not family promises). A COB head judged only by its silhouette is a gamble, because two near-identical cylinders can be quite different fittings inside.

05 / TRADE NOTE

The comparison, on one page

QuestionGU10MR16COB
What am I really choosing?A head plus a replaceable lampA head, a lamp, and its supply arrangementA complete head, as a model
What gets replaced later?The lamp, usuallyThe lamp, with the supply arrangement in mindThe head or its service route
What must the enquiry name?Head, lamp, rail, control if keptHead, lamp, supply equipment, railModel, optics, control requirements, rail
Where do comparisons go wrong?Lamp left unspecifiedSupply side assumedModel judged by appearance

A table won't choose for you. It will stop the three conversations from collapsing into one misleading price column, which is most of the battle.

06 / TRADE NOTE

Service day is the real test

Imagine each option eighteen months on. Something has failed on a Tuesday, the shop opens at ten, and the person fixing it has a steps ladder and whatever the order file tells them. For the lamp-based heads: can they identify the right lamp, reach it, and swap it without disturbing the rest of the run? For the COB head: does the file name the model precisely enough to start a service or replacement conversation, or does it just say "COB track light" and wish everyone luck?

Run that little film before you order, not after. The family that looks simplest on the quotation sometimes writes the most complicated Tuesday.

07 / TRADE NOTE

Dimming belongs to the combination

If the existing control is staying, it belongs in the comparison from the first email — beside the lamp, beside the head, not added as a footnote once the price is agreed. A lamp-based head changes its dimming behaviour when the lamp changes. A COB head carries its own requirements. In both cases the question is the same and it is never "is it dimmable?" in the abstract. It is: this control, this head or lamp, this rail — what should we expect, and what would you propose instead?

08 / TRADE NOTE

None of these names identifies your track

One more separation, because it causes expensive confusion. GU10, MR16 and COB describe the front of the head — the source end. They say nothing about the adapter at the back or the rail it has to join. A replacement enquiry that leads with the source family and never identifies the rail is half an enquiry, and the missing half is the half that decides whether the new head can go up at all.

So write the order in lines that keep the halves apart: source family and what you're buying (complete light or housing), then the rail identification, then the control if it's staying. Do that, and whichever family you choose, the person answering can answer the question you actually asked.

09 / TRADE NOTE

Housings change who does the work, not whether work exists

A word for buyers comparing complete heads against housings, because the three families all sell in both forms and the price gap can seduce. A housing is cheaper because part of the product is missing — by design. The lamp or module, the assembly labour, the testing, the responsibility for the finished result: those move to your side of the table. For an assembler or a brand with its own line, that's exactly the point. For a retailer who wanted lights, it's a warehouse of nearly-lights and a lesson arriving by freight.

Neither form is the honest one. They're different divisions of labour wearing the same paint. The quotation only becomes comparable when each line confesses its form — complete light, or housing for assembly — and the missing parts are costed by whoever will supply them. If a line won't say which form it is, ask, and treat a vague answer as an answer.

This is also where the source-family question and the form question shake hands: a GU10 housing plus your chosen lamp is a product you are partly manufacturing, while a complete COB head is a product you are wholly buying. Choose per line, write per line, and the three families stop competing in the abstract and start competing where they should — against the work your team actually wants to do.

The night the spares box let somebody down

A lamp fails twenty minutes before opening. There's a spares box — there is always a spares box — but what's in it belongs to a fitting retired two refurbishments ago, and the order file describes the current heads with a photograph and the words "track light, white". The shop opens under one dark patch, and the morning's real purchase becomes information.

It doesn't have to be elaborate. Head reference, lamp or service route, rail identity, control if there is one, kept where the person on the early shift can find it. The three families in this article all become easier to live with the day that page exists; without it, even the most replaceable lamp in the world is a research project at 9:40 in the morning.

What should I send Sampo about gu10 vs mr16 vs cob track lights?

Tell Sampo whether the order is for complete lights or housings, name the preferred source family and include the rail identification with your model questions.

Ask Sampo about fit

NEXT / HEAD SELECTION

Request a track light quotation

Send the holder family, rail details, quantity and market.

Ask Sampo about fit